The COTwo Marker is a gas laser with a wavelength of 10,600 nm, which allows plastics, glass as well as organic materials to be machined. The solely air-cooled, compact laser system is suitable for both small batch and line production. As is the case with all ACI lasers, it is equipped with an optical focusing aid and preview function to ensure easy handling. The COTwo Marker is a closed system and does not require any CO2 gas supply. This low-maintenance device allows continued operation with no long downtimes. This system represents a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.
Fields of application
The COTwo Marker laser can be used either at a manual workplace or as integration component in an automated system.
Software
The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos and wraparound circumferential marking without lap marks on rotationally symmetrical workpieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user's individual requirements. Even semiautomatic operation with independent data exchange to different data sources is possible without any problems.
Please contact our distribution partner in your home country for further information.


Technical details
Lasertype | CO2, sealed off |
Wave length | 10.600 nm |
Pumping principle | |
Laser power | 30W @ 50% ED, 20W @ 75% ED |
Beam quality | M² ≤1,2 |
Number of adjustable pulse lengths | |
Pulse repetition rate | |
Laser class | 4 |
Input | 100 W ≤ Pel ≤ 400 W |
Weight | 20 kg |
Length | 740 mm |
Width | 201 mm |
Height | 233 mm |
Connected load | 100-240 VAC / 16 A / 50-60 Hz |
Interfaces | USB 2.0, SPS-Interface, Interlock PLe |
Materials
Metal | |
---|---|
Annealing marking | ![]() |
Coating ablation | ![]() |
Material ablation | ![]() |
Plastic | |
---|---|
Foaming | ![]() |
Carbonation | ![]() |
Engraving | ![]() |
Glass | ![]() |
---|
Ceramic | ![]() |
---|
Wood, Paper, Leather | ![]() |
---|
nicht geeignet |